Metal Roof

Professional Metal Roof Installation in Westchester & Rockland, NY

If you're looking for something that will last and handle every bit of New York weather, metal might be the way to go. We install metal roofs all over Rockland and Westchester, and they've held up through snowstorms, heatwaves, and everything in between. Standing seam gives you that clean, modern look. Exposed fastener systems are more budget-friendly but still tough. We also install copper, aluminium, and coated steel, depending on the style and budget.
A well-installed metal roof adds serious value to your home and cuts down on long-term upkeep. We've been doing these jobs for 15+ years, and we know how to fit the system to the house, not the other way around.

Why Homeowners Hire Us for Metal Roofing

We have been putting on metal roofs in Rockland and Westchester for more than 15 years. Folks call us because they want the job done right the first time, without the runaround. We don’t send out subs or cut corners; the same crew that shows up is the one that finishes the roof.

Here’s what you can expect when you hire us:

Our Metal Roofing Services

Whether you’re putting in a metal roof from scratch or dealing with one that’s seen better days, we’ve got you covered.

 We build it from the deck up. Every seam, vent, and flashing point gets done with care. We don’t rush it, especially around tricky edges or valleys.

If the roof’s rusting or leaking, we take it down to the deck and rebuild it properly, no shortcuts, no guesswork.

 One bad panel or a slow leak? We’ll find it, fix it, and stop it from getting worse.

 We look over fasteners, sealant, flashing, the stuff that matters. Quick, simple, no hard sell.

 Skylight cutouts, ridge caps, snow guards, colour-matched trim. We do the finishing work that makes the whole roof look sharp and hold up better over time.

Need Help? Call us!

+1 (914) 309-6449
Meridian Contracting

Types of Metal Roofs We Install

Not every metal roof makes sense for every home. Some work better on steep pitches, some are better for handling ice buildup, and some just come down to what kind of look you want. We’ve installed a bunch of different types across Rockland and Westchester. Here are the main ones homeowners go for:
Standing seam

These are the tall vertical panels with no visible screws. Super clean look. They hold up great in heavy snow and ice, which makes them a favourite around Rockland and Westchester.

Exposed fastener systems

Are a bit more affordable and quicker to install. You’ll still get solid protection, especially for garages, barns, or outbuildings.

Metal shingles

Mimic the look of regular shingles or even cedar, but with way better durability. Some homeowners like them because they blend into the neighbourhood better.

Custom metals

We’ve installed aluminum, steel, copper, and even zinc; each one has its strengths. Aluminum’s good near saltwater. Copper ages beautifully but costs more. Steel is the standard around here because of its strength-to-cost ratio.

Meridian Contracting

Step-by-Step Metal Roof Installation Process

Every job’s a little different, but here’s how the process usually goes when we install metal roofing in Rockland and Westchester:
Meridian Contracting

Durability & Lifespan in the New York Climate

A lot of homeowners switch to metal because it doesn’t get beaten up the way shingles do. Up here, where winters hit hard and summers get sticky, it’s one of the few roof types that holds up year after year.
Longevity
You’re looking at 40 to 70 years if it’s installed right and checked on once in a while. That’s twice what you’d get from shingles.
Winter protection
Snow slides right off standing seam panels, and you won’t deal with ice dams as much because there aren’t as many places for water to get stuck.
Summer cooling
A lot of metal roofs come coated to reflect heat, so your attic doesn’t turn into an oven. Helps take pressure off your AC.
Rain & wind
As long as it’s sealed and fastened correctly, metal holds up great in downpours and heavy wind. We see that a lot in the Hudson Valley; roofs get hit hard, but the metal ones stay put.
Maintenance
Give the roof a quick look once or twice a year. Tighten any loose fasteners, reseal the edges if they need it, and clear leaves or dirt from the vents. That’s all it takes to keep it in shape.

Types of Roof Installations We Handle

Not every roof is the same, and neither is the way we put them on. Around Rockland and Westchester, the weather and house style often decide what works best. Our crew has worked with just about every type of system, and we install them the way they’re meant to be installed.
Shingle Roof Installation

Shingles are still the go-to for most homes here. They’re cost-effective, come in plenty of styles, and hold up well when installed right. We work with GAF, Owens Corning, and CertainTeed architectural shingles, built to take years of New York winters and hot summers.

Slate Roof Installation

Slate gives a roof a classic look and can last a lifetime, but it only pays off if it’s installed correctly. We set each piece with care, making sure the deck, flashing, and stone all line up tight to keep water out.

Tile Roof Installation

Clay, concrete, or composite tiles bring curb appeal and strength. They’re heavier than most materials, so we make sure the framing and flashing are solid before they go on. Done right, a tile roof can last for decades.

Cedar Roof Installation

Cedar shakes add warmth and natural insulation to a home. We install both traditional cedar and newer synthetic options, always with proper venting and barriers to keep moisture from creeping in.

Flat Roof Installation

Flat roofs need extra attention to drainage, or water will find a way in. We install EPDM, TPO, and modified bitumen systems that keep surfaces watertight and are built to handle the freeze-and-thaw cycles common in this area.

Areas We Serve Roof Installation

We handle metal roofing across both Rockland and Westchester, and we know the weather, architecture, and building codes in each town like the back of our hand.

Request Your Free Metal Roof Estimate

Whether you’ve got an old roof that’s showing its age or you’re planning for something stronger, we’re here to help. Reach out for a free quote, we’ll take a look, explain your options, and give you real numbers you can plan around.

Call Now or Request Your Free Estimate Online

Experience the Meridian Contracting difference, backed by 15+ years of trusted roofing experience in Rockland and Westchester Counties.

FAQs About Metal Roofing

If it’s installed right and checked on every few years, it’ll last 40 to 70 years. We’ve seen plenty still holding strong after decades in upstate weather.

Rockland runs about $8 to $11 per sq. ft. Westchester’s a bit higher, closer to $9 to $12, mostly because of labor costs and permit differences.

It’s a metal roof with the screws tucked underneath, so water doesn’t get in as easily. Snow also slides off quickly, which helps during rough winters.

Yes. A lot of buyers see it as a long-term upgrade. We’ve had clients sell faster or get better offers because the new roof took maintenance worries off the table.

Usually, yes, if the roof was installed by a certified crew and maintained properly. But some storm stuff goes through your homeowners’ insurance, not the product warranty.

Read Our Popular Articles

Contact Us